When we put wallpapers, we constantly encounter problems such as this. In particular, most of the friends who want to do their personal wallpapers are a lot more than they desire, and finally they will find there are always some small flaws.
In fact, as long as the construction is looked after, these problems can be avoided. Today, we will choose these problems and focus on solving them!
Base film peeling
1) Before brushing the bottom film, check whether the wall is standard, zero powder, no floating level.
2) Is there hook crack in the wall?
3) If the construction temperature is above 5 degrees.
4) Brush the bottom film too thick when it is first, and brush the second one when it is not dry. Because of the difference in drying time taken between the inner and outer layers, it may cause peeling.
5) Whether the base film is too thick, could be relieved by adding drinking water. After polishing with sandpaper, re-brush the base film.
The treatment of the base film includes a great influence on the wallpaper effect, and the most direct effect is the stability of the wallpaper. Therefore, the base film must be handled relative to the requirements of the instructions, combined with the actual situation.
Glue overflow
Glue overflow is a common phenomenon in the process of wallpapering. Through the construction process, stay away from the glue overflowing the wallpaper surface area through the paper tape. The rubber surface wallpaper is relatively simple to clean. You may use all of the wallpaper except the rubber tape wallpaper. Paper tape construction is recommended.
1) Wipe with a damp sponge for a surface area washable wallpaper.
2) Use a dry towel to eliminate it, ideal for wallpapers that cannot be stained on the top.
3) Absorbed with a wet sponge, ideal for wallpapers with particles on the surface.
There are signs at the joint seam
The handling of wallpaper seams is definitely an integral part of wallpaper construction, and many professional construction masters have their own tips. For the layman, pay special attention to the structure. When the wallpaper was applied, the glue didn’t completely hurry out and piled up at the seams. The glue reacted with the wallpaper for a long time.
Remedy: 60-80 degrees boiling water a small bottle, plus a bottle of white vinegar, await the drinking water to cool down, squat in the seam. (Recommended for partial assessment), the wallpaper will last better in 1-2 months, and 80% of the traces can be removed.
Wallpaper shrinking
The phenomenon of wallpaper shrinkage is mainly caused by the workers’ lack of strict seams during construction, which leads to this problem in the later on stage, which relates to the construction technology of the workers. Since the wallpaper is made from wood pulp, it has the Pure paper Wall covering characteristics of real wood swelling and shrinking, the performance isn’t particularly stable, you will see a certain expansion following the glue is finished, and shrinkage occurs during the drying procedure. Although the growth is uncontrollable, employees can control shrinkage during construction.
Most of the wallpaper shrinks are invisible unless the joints are not enough. In this case, it is generally preferable to reserve a coincident part at the joint. Usually, it is preferable that the joint overlaps at 1-3 cm.
If shrinkage has already occurred, the repair procedure is relatively simple. Make use of a wet towel dampened with water to soak the seam for 10 minutes, and use the edge of the wallpaper knife to choose the wallpaper, which can usually be picked up. If the attachment on the top of wallpaper is a metallic surface, it is easy to make the surface of the wallpaper tarnish and black after scraping, and it is not recommended to operate.
Wallpaper moldy
1) The wallpaper is moldy and generally has spots on the top of wallpaper.
(1) The wall should be inspected for water seepage.
(2) If the glue is totally dry.
(3)When wallpaper is definitely applied, whether moisture and atmosphere can be found in the wallpaper for a long time, react with the glue to trigger mold.
(4) The weather is humid.
(5) The wallpaper is wet.
Moldy wallpaper is normally a problem that people who are wallpapering are worried about. It is also one of the most difficult problems to solve after emergence. Therefore, this kind of issue should be based on prevention. It is advisable to work before moisture and moisture.
Then, following the wallpaper provides such problems, is there no solution? of course not.
2) Processing method
(1) The mildew is small. It is suggested to wipe with drinking water or detergent and blow dried out with a hair dryer.
(2) Bleaching water is normally simple to irritate the epidermis and may cause the wallpaper to fade. It isn’t recommended.
(3) If the mold is huge, the wallpaper needs to be replaced. If the wall structure is seepage, it’s important to completely solve the problem before posting.