rubber inner mixer miXiHu (West Lake) Dis.ng kneading EPT
|Molde/Product||X(S)N-35 times30||X(S)N-fifty five times30||X(S)N-seventy five times30||X(S)N- one hundred ten times30||X(S)N- one hundred fifty times30||X(S)N- 200 times30|
|Overall quantity of miXiHu (West Lake) Dis.ng chamber||L||seventy five||one hundred twenty five||170||250||325||440|
|Working quantity of miXiHu (West Lake) Dis.ng chamber||L||35||fifty five||75||one hundred ten||a hundred and fifty||200|
|Driving motor EPT||kW||fifty five||75||a hundred and ten||185||220||280|
|Tilting motor EPT||kW||1.one||1.1||2.2||4||5.five||seven.5|
|Tilting angle||deg||140||one hundred forty||a hundred and forty||a hundred and forty||a hundred and forty||140|
|Rotational pace of the rotor (front /rear)||r/min||30/24.five||30/24.5||30/24.five||thirty/24.five||30/24.five||30/24.5|
|Stress of compressed air||MPa||.5~.eight||.6~.eight||.six~.8||.6~.eight||.6~.8||.six~.8|
|Capability of compressed air||m3/min||ge0.nine||ge1.||ge1.||ge1.5||ge2.||ge2.|
|Force of cooling h2o (rubber miXiHu (West Lake) Dis.ng )||MPa||.3~.four||.3~.4||.3~.4||.3~.4||.2~.4||.2~.4|
|Strain of heating steam (plastics miXiHu (West Lake) Dis.ng )||MPa||.five~.8||.five~.8||.5~.eight||.five~.8||.4~.eight||.4~.8|
|Complete weight( kg )||6500||7800||10500||14500||19500||22500|
Functions of the EPT Type Rubber Kneader
1. MiXiHu (West Lake) Dis.ng chamber is consisted of two side plates and the omega -shaped weld by higher-top quality steel plates The jacketed structure is employed for cooling or heating And the internal surface area is treated with chromium plating.
2. The thermal resistance: The middle of the miXiHu (West Lake) Dis.ng chamber base is outfitted with plug-in thermal resistance and related with the electrical manage system, so as to monitor and control the miXiHu (West Lake) Dis.ng temperature.
three. Rotor: Banbury rotor The holes in the rotor shaft cEPTr are connected with the inner cavity of the convex ridge, and form the cooling and heating channel. The wear-resisting cemEPTd carbide on the ridge peak and surfacing is poEPTd right after the graining and hard chromium plating.
four. Heating and cooling system undertake a set of EPT pipeline program to make the cooling drinking water or heating steam movement into the convex ridge, miXiHu (West Lake) Dis.ng chamber and the ram cavity in a few paths, so as to cool or heat the components circularly.
five. Roll-over mechanism: The class-II retarding system is consisted of the braking motor, cycloid EPT, spiral gear and helical equipment, so as to push the miXiHu (West Lake) Dis.ng chamber to rotate around the entrance rotor about 140 deg .
6. Sealing system is sealed by the floating oil movie with three defensive lines of rotor shaft and stop faces. It is tough and the powEPTleakage is totally solved.
seven. The primary EPT technique is consisted of the major motor, EPT, velocity-ratio gear box The two rotors achieve the opposite differential rotation.
eight. The pneumatic control system is controlled by PLC command The increase and fall of the ram is pushed by the two-way cylinder. When the miXiHu (West Lake) Dis.ng is overloaded, the ram rises automatically and plaEPTa function in guarding the motor. It is possible to forcibly raise the ram via handbook procedure in an unexpected emergency.
9. Electrical handle program adopts the EPTed PLC gadget All the electronic factors are EPTed.