High Qality Glue for Insulation Board

High Qality Glue for Insulation Board

Adhesive is important assistant material of anti-theft door, steel wood doors, polymer doorways, which refers to make contact with with air curing one ingredient adhesive. With the features of large bonding toughness, great weathering resistance, effortless to use, drinking water resistance and so on, it is broadly used in iron and metal, galvanized metal plate, wood composition and and many others.

Application Desc.:

Honeycomb paper (incXiHu (West Lake) Dis.Hu (West Lake) Dis. aluminum honeycomb paper, polymer honeycomb paper, and many others.) EPT foam glue. Used in require filling gadget bonding honeycomb paper and other paper goods.

Used for bonding fireproof board, honeycomb paper in units these kinds of as protection doors, and so forth..

Bonding polystyrene foam board for use in gadgets this kind of as protection doorways, and so forth.

Functions:

one. Robust adhesion, shear, substantial peel strength, large and reduced temperature resistance, hydrolysis resistance , warmth resistance and getting older resistance.

two. It can achieve optimum bodily overall performance soon after curing at room temperature and no degumming phenomenon in the process of transfer printing of protection doorway.

three. The operational time adjustment is powerful, it can be selected according to the various time and diverse curing method of Styrofoam.

4. Minimal toXiHu (West Lake) Dis.town solvent, without utilizing highly toXiHu (West Lake) Dis.c solvent to reduce expenses.

Technological Index:

Viscosity(with 4 cups, 77 ordmF):a hundred-300s

Successful compound contentL78+-three%

Use:

one)Brushing procedure: the floor of the working item is pretreatment #8594brushing glue #8594agglutination #8594curing. Cleansing the adhesive surface of stability doorway to guarantee that no rust and no oil. It will result the adhesion of Styrofoam if this part not be great taken care of.

2)In orEPTto ensure the energy of the adhesive, location the adhesive evenly coated scratch in the sticky area. It’s greater to scrape with plastic toothed blade scraper, it can not use hairbrush brush glue due to the fact of substantial viscosity. The dosage of glue can be confirmed by the embossed depth of door. Brushing should not be as well thick, uncovered time not way too EPT.

three)Shell out focus to velocity the procedure of gluing, coating evenly. It require quick velocity in summertime, not brush back and forth several moments. If the action is gradual, you can place stress in the glue EPT, do not wait for the surface glue has dried and then place force on. Agglutination can be managed by chilly pier or scorching pier, the least time of cold pier is three-four several hours and the minimum time of scorching pier is 15-30 minutes. The cement time more than ten hrs, it really is far better that the backing temperature is 190 ~ 220C deg.

four)You should seal use lid for the unused glue to keep away from curing crust. The thoroughly clean of instruments can use ethyl acetate solvent, or it can be soaked in warm drinking water for a handful of minutes, and then wash with soap. This item should be saved in a dry, ventilated, sealed setting, please do not touch the water.

Focus:

In the two procedure of brushing glue and strain on glue, it should be completed in the surface drying time that usually less than 20 minutes .

EPT amp Shipping:

EPT Details 200kg/drum, 80 drums for a 20” container.
Shipping Time 15 daEPTafter purchase

About us:
HangZhou XiHu (West Lake) Dis.hu (West Lake) Dis. Chemical Co., Ltd. is a single of the largest adhesive producers in China, EPTizes in the analysis, manufacture and advertising of various kinds of adhesives, incEPTd: Water-Primarily based Homo-Polyvinyl Acetate Emulsion Adhesive, Polyurethane adhesive, spray adhesive, make contact with adhesive, footwear adhesive, wallpaper glue, and so on. OEM is available right here.

High Qality Glue for Insulation Board

High Qality Glue for Insulation Board

Tags

Location