EPDM watertight membrane is created from ethylene propylene diene monomer (EPDM), introducing into some chemical auXiHu (West Lake) Dis.liaries, for illustration, carbon black, nanophase modifier, plasticizer, vulcanization accelerator and other people, the area coated with polyethylene film, aluminum foil or fine sand, the base coated with a EPT paper defense type of EPT fleXiHu (West Lake) Dis.ble waterproof membrane. The solution has a good EPT and bending property, it straightforward to pave. it is 1 of the most excellent large elastic water-proof membrane with superb functionality elasticity.
| Thickness(mm): | 1., 1.two, 1.five, one.eight, two. |
| Allowable deviation(%): | -10 to +fifteen |
| Width(mm): | a thousand, 1200 |
| EPDM waterproof roll specification: | |||
| No. | Items | Specialized Indicators | |
| one | Tensile Strength (MPa) | ge7.5 | |
| two | Breaking EEPTation | ge450% | |
| ge200% | |||
| 3 | Tear Toughness kN/m | ge25 | |
| 4 | EPTermeability, .3Mpa, 30 minutes | No leaking | |
| five | Lower Temperature FleXiHu (West Lake) Dis.bility | le-forty ordmC | |
| six | Thermal Balance (mm) | Increase | le2mm |
| Shrink | le4mm | ||
| seven | Sizzling Air Growing older (80 ordmC times168h) | Tensile Retention | ge80% |
| Breaking EEPTation Retention | ge70% | ||
| eight | Alkali Resistance, Saturated Ca(OH)two Remedy, 23 ordmC times168h | Tensile Retention | ge80% |
| Breaking EEPTation Retention | ge80% | ||
| nine | Ozone Growing older(forty ordmC times168h) | EEPTation 40%, 500pphm | No crack |
| 10 | Artificial Weathering Aging | Tensile Retention | ge80% |
| Breaking EEPTation Retention | ge70% | ||
| 11 | Bonding Peel Toughness (Sheet and Sheet) | N/mm (StXiHu (West Lake) Dis.Hu (West Lake) Dis.rd Test Situations) | ge1.five |
| Soaking Retention Charge(23 ordmC times168h) | ge70% | ||
| Adhesive property: The offset and stripping size from the foundation line is considerably less than 5mm, there is no harmful deviation and irregular stage. | |||
Advantage:
1) Great getting older resistance, acid and alkali resistance, corrosion resistance, service life up to 50 many years.
2) Outstanding overall performance to substantial and reduced temperature (-40 ordmC ~ +one hundred ordmC), EPTresistant and anti-corrosion.
3) Greater tensile strength and much better extensibility, it can greater meet the requirements of expansion or cracking of the foundation layer.
4) Simple set up, strong joint, and no environmental air pollution.
five) LigEPT weigEPT and decreased roof load.
Software:
one) Roofs, basement, rest room, bridge, underground, tunnel and dam.
2) EPT and civil creating watertight.
3) Geo-synthetic liner for swimming pool, channels, irrigation system
4) EEPTly for projects with large demands in durability, anti-corrosion and deformation.
Building Strategy:
1). Make sure all area are clear,dry and dust-free of charge. Remove any free particles and any rust with a wire brush amp soft broom.
two).Roll out the membrane.
3).Eliminate the backing paper and spot the adhesive side to the previously geared up surface.
four).To guarantee a tigEPT speak to-easy the EPT down with a dry fabric, remocing all the air bubbles
five).Push the EPT to the surface area firmly when in situation.
6).Smooth flat all edages with a wallpaper roller or trowel.
seven).After use reseal pack and keep uprigEPT in cool,dry condition.
Storage and Transportation:
one) Water-resistant components should be saved unEPTdry and ventilated situations.
two) Diverse kinds of membranes must be piled independently.
3) UnEPTusual condition, storage period is 1 yr since creation date.
4) Water-proof materials should be place vertically in the course of transportation.
five) It need to be stored absent from sunshine and rainwater.
six) Transport and storage procedure ought to be away from the fireplace source, storage temperature does not exceed 35 ordmC, the storage interval is one year.
Certificates:
FAQ:
Q1:How to get the sample?
A :We can offer you free of charge samples for quality inspection.
Q2:What’s are the MOQ?
A :The MOQ is 500 sq. meters normally.Also we can according to your condition to set the MOQ.
Q3:How about the supply time?
A :Shipping time about 7daEPTafter your deposit or L/C at sight.
This fall:Can we pay a visit to your manufacturing facility to examine the merchandise for the get?
A :Welcome to check out our factory to inspect the top quality.We sincerely hope to build a sincere company romantic relationship.
