Coating Powder for Fabric Printing

Coating Powder for Fabric Printing

Sticky Sublimation Coating Powder
Sticky sublimation coating powEPTis particularly developed and deveXiHu (West Lake) Dis.Hu (West Lake) Dis.ed for the elastic fabric transfer printing, to prevent the overlap of the pattern, deformation and other issues of elastic fabric in the process of transfer, ensuing in a very minimal move fee of transfer printing.
1 In the course of the transferring, the sticky coating powEPTcould be able to adhere the material and paper, but there is no glue residue on the material right after stripping
two The stickiness of the material and paper can be modified by the manufacturer of the transfer paper unEPTthe advice of our firm and the viscosity is a lot more steady, which can be stored for a EPT time.

High Concentration Sublimation Coating Powder
For the current higher-pace coating EPTs, our company independently deveXiHu (West Lake) Dis.Hu (West Lake) Dis.s a strong content material of a lot more than thirty% of the coating chemical – large concentration coating powder. On the basis of no escalating in fees, the coating speed could be substantially enhanced, and manufacturing capacity will be doubled than the quick-dry coating powders.

For substantial-pace coating EPT production, coating company ought to have a experienced coating technologies.

Fast-dry Sublimation Coating Powder
The formulation of the very first generation of EPT sublimation transfer paper coating is commonly utilised in the marketplace, but slowly it can’t be matched with the necessity of substantial-pace printer thanks to the higher value, lower manufacturing performance and slow drying of printing coating.
Nano-induced secondary self-assembly techniques of this coating substance, are greatly enhanced in the following aspects:

one The total expense of this fast-dry combined powEPTis diminished whilst the usability of the powEPTremains unchanged

two This fast-working day coating powEPTcan boost the effectiveness of coating production, and the manufacturing velocity can be promoted by more than 25%.

three Due to functional advancement, the printing drying fee of this solution has been enhanced much more than a single time, and it can savelarge amount of electrical EPT from the baking lamp.

How to use our coating powEPT:

  1. Incorporating proportional h2o into stirring tank, maintain h2o temperature as very same as space temperature.
  2. Set EPT bag coating powEPTslowly into agitator although stirring, and hold stirring right up until the chemical powEPTdissolving uniformly into h2o, no lump on the area of liquid. The dissolution time is dependent on the technique of agitator.
  3. EPTking some samples of carrying out checks right after dissolving, and get notes of glue temperature and corresponding viscosity, make certain the competent tests result prior to filtration.
  4. Two occasions of filtration just before coating on EPT with 800-100mesh filter
  5. The liquid glue continue to be on EPT is recyclable while coating. It must be by means of filter monitor yet again and can be used in miXiHu (West Lake) with new liquid coating substances.

Coating Powder for Fabric Printing

Coating Powder for Fabric Printing